Toggle Nav
Cart

Product care


We are bed manufacturers, passionate late risers, sleep connoisseurs and bed-afficionados; we love to live and sleep naturally. Over the many years in bed and in deep sleep ;-) experience and knowledge are developed; we like to share this with our fellow men here. We are looking forward to your questions and suggestions - here for washing, drying and general care of our products.

Inhalt:
1. HOW TO WASH MY BED PRODUCTS?
2. HOW TO WASH MY BED linen AND towels?
3. HOW WASH I WASH MY MATTRESS AND TOPPER COVERS AND PROTECTORS?

- Collection and editing Dr. Habertag -


1. HOW TO WASH MY BED PRODUCTS ?

Professional cleaning is recommended. Here you will find important instructions that will help to maintain the properties of your bed products throughout their entire product life.

WHAT TO USE FOR WASHING MACHINES?

For the laundry of your bedding products the capacity of the washing machine should be at least 40kg / 80lbs. An even higher capacity is recommended. To avoid damage to the product and the washing machine, the washing machine should be filled to a maximum of 25% of its total capacity. For so-called top-loading washing machines, please always use two products to balance imbalances (if you only have one product, balance it with a few large towels of similar total weight).

WHAT IS REQUIRED FOR A WASHING PROCESS?

The main wash should be done at a temperature of 40°C in a "gentle wash" mode (less movement / much relaxation) for about 15-20 minutes. Then rinse 4 times without any detergent, each rinse cycle lasting about 5 minutes. The third and fourth cycle should be performed with a high water level. At the end of the fourth cycle, spin the product at high speed. If you accidentally set a higher temperature, the material properties of good bed products will ensure that you retain their good product properties. However, the high temperatures will wear the products out more quickly and you may lose your warranty.

WHAT WASHING AGENTS ARE USED?

Only mild detergents should be used and as little of them as possible > max. 25g / 1oz per kg! After washing, the detergents must be rinsed completely, otherwise the materials may stick together during the drying process.

WHICH DRYERS ARE USED?

Für die Trocknung Ihrer Bettenprodukte sollte die Kapazität des Wäschetrockners mindestens 40kg / 80lbs sein. Eine noch höhere Kapazität ist zu empfehlen. Um jegliche Beschädigung des Produkts zu vermeiden, sollte der Wäschetrockner mit maximal 25% seiner Gesamtbelastung aufgefüllt werden.

HOW DO I DRY MY BED PRODUCTS?

To ensure the best possible results, the drying of all bedding must be carried out very carefully, which means that it must be dried at a temperature not exceeding 60°C. The drum of the dryer must oscillate during the drying process (the direction of rotation must change randomly). This is the only way to maintain the best properties of your products throughout their entire life. For every 2kg, we recommend adding a tennis ball to the drum (no joke!). Dry the products for about 20 minutes. Then take them out of the dryer and shake them. Repeat this process at least three times, or until the products are dry and nicely fluffy.

ARE THERE OTHER ASPECTS TO CONSIDER WHEN DRYING?

Don't bleach the product - no ironing of filled products - no ironing defects / hot pressing of filled products - no chemical additives / cleaning of filled products - bed products should be washed once every few months / at least once per season.


2. HOW TO WASH MY Linen and towels?

Professional cleaning is recommended. Here you will find important instructions that will help to maintain the properties of your bed linen and towels over the product life.

WHAT TO USE FOR WASHING MACHINES?

For bed linen and towels the capacity of the washing machine should be at least 7kg / 15lbs. A higher capacity is recommended. To avoid damage to the product and the washing machine, the washing machine should be filled to a maximum of 80% of its total capacity. For top-loading washing machines, always use two products to correct imbalances (if you only have one product, balance it with a few large towels of similar total weight)

WHAT IS REQUIRED FOR A WASHING PROCESS?

The main wash should be done at a temperature of 40°C in a "gentle wash" mode (less movement / much relaxation) for about 15-20 minutes. Then rinse 4 times without any detergent, each rinse cycle lasting about 5 minutes. The third and fourth cycle should be performed with a high water level. At the end of the fourth cycle, spin the product at high speed. If you inadvertently set a higher temperature, the material properties of good products will ensure that you still retain their product properties. However, the high temperatures will contribute to wear and tear and you may lose your warranty.

WHAT WASHING AGENTS ARE USED?

Only mild detergents are to be used and as little of them as possible; max. 25g / 1oz per kg! After washing, the detergents must be rinsed out completely, otherwise a soapy feeling may remain.

HOW CAN I DRY BEDDY Linen?

Bed linen and terry towelling must be dried at high temperatures, please contact your dryer manufacturer for suitable settings, which must be observed for both the products and the durability of your dryer! Pure cotton bed linen typically needs to be ironed after washing, ironing of cotton-poly blend bed linen is recommended but not required (see below) Towels should not be ironed

Can I DRY Linen without ironing it?

You don't want to iron your sheets? Dry your products at high temperatures. After the first cooling cycle (sheets that are still almost hot and have more than 6% moisture), take products out of the dryer and fold them. Note that the products are still almost wet at this stage. And the folding must be done immediately after the cooling cycle: If the products cool before folding, they will wrinkle. So for larger quantities, you need to have enough staff to do everything before the products cool down. Please note that this only gives good results for cotton-poly blend bed linen; pure cotton bed linen must be ironed for best results. Biodegradable detergents are best for the longevity of your products.

ARE THERE OTHER ASPECTS TO CONSIDER WHEN DRYING?

Do not bleach the product - wash bed linen and towels once every few days


3. HOW TO WASH MY MATTRESS AND TOPPER COVERS AND PROTECTORS

Professional cleaning is recommended. Here you will find important instructions that will help to maintain the properties of your covers and protectors over the entire life of the product.

WHAT TO USE FOR WASHING MACHINES?

For the washing of your covers and protectors the capacity of the washing machine should be at least 20kg / 40lbs. An even higher capacity is recommended. To avoid any damage to the product and the washing machine, the washing machine should be filled to a maximum of 50% of its total capacity. For toploader washing machines, always wash two products to correct imbalances (if you have only one product, balance it with a few large towels of similar total weight).

WHAT IS REQUIRED FOR A WASHING PROCESS?

The main wash should be done at a temperature of 40°C in a "gentle wash" mode (less movement / much relaxation) for about 15-20 minutes. Then rinse 4 times without any detergent, each rinse cycle lasting about 5 minutes. The third and fourth cycle should be performed with a high water level. At the end of the fourth cycle, spin the product at high speed. If you inadvertently set a higher temperature, the material properties of good bedding products will ensure that the product properties are retained. However, the high temperatures contribute to wear and tear and you may lose your warranty.

WHAT WASHING AGENTS ARE USED?

Only mild detergents are to be used and as little of them as possible; max. 25g / 1oz per kg! After washing, the detergents must be rinsed out completely, otherwise a soapy residual feeling remains.

WHICH DRYERS ARE USED?

The capacity of the tumble dryer should be at least 40kg / 80lbs A higher capacity is recommended. To avoid any damage to the product, the tumble dryer should be filled to a maximum of 25% of its total capacity.

HOW DRIED I AM MY COVERS AND PROTECTORS ?

To ensure the best possible results, the drying of all covers and protectors must be carried out very carefully, i.e. they may be dried at a temperature of up to 60°C maximum. Dry the products for about 30 minutes. Take them out of the dryer and shake them. Repeat this drying and shaking at least twice, or until the products are dry.

ARE OTHER ASPECTS TO BE ATTENDED TO DRY ?

Do not bleach the product - no ironing of laminated products - no ironing / hot pressing of products - no chemical additives / cleaning of products - wash products once every few months / at least once per season.